Work experience

• Quality Engineering Team Lead

  VINFAST

  2022.12-Current

  (3 years)

  (2 years 7 months) > Warranty issues cross check with claim details and implement ICA and PCA > Serial life models customer issue resolving with effective PDCA > Review PFMEA and update sev, occ rate based on the issue reoccurence > Prepare and Review satandatd for dimension (IPQS, CVIS) for all shops > Implement lookback in upcoming new models > Issue management with JIRA system > Field issues analysis and work with engineering team for petmanent solution > COD evaluation with GD&T team for smooth operation
• Deputy Manager

  Renault-Nissan-Mitsubishi

  2021.04-2022.12

  (2 years)

  2 years 10 months (1 year 9 months) Renault Global project Lead ( Upstream to Development phase)
• Geometry pilot

  Renault-Nissan-Mitsubishi

  2020.03-2021.04

  (a year)

  (1 year 2 months) Geometry Pilot for New project, Preparing Geometry requirements with Corporate approval, Evaluating COD , Preparing Quality securing plan for achieving accuracy , Performing Be-Map activity from supplier to inline process.
• Project Implementation Specialist

  Nissan Motors Africa

  2019.08-2020.03

  (8 months)

  BIW Project support and lead VC LOT (Japan) and PT lot at Nissan South Africa to achieve all project Quality KPI and guide the local team for Project activities.
• Project Leader

  Renault-Nissan-Mitsubishi

  2018.01-2019.07

  (2 years)

  6 years 3 months (1 year 7 months) Overall Project Lead for Derivative Project (New Duster) Responsible for Overall Facility planning and Quality Proving.
• Assistant Manager

  Renault-Nissan-Mitsubishi

  2016.11-2018.01

  (a year)

  (1 year 3 months) New model Customer Quality and Metal line incharge (Renault Captur) , Following internal team to avoid Customer Quality concerns and Preparing Metal spec sheet for metal jigs also responsible for Metal line quality deliverables.
• Senior Engineer

  Renault-Nissan-Mitsubishi

  2016.04-2016.11

  (8 months)

  Metal Simultaneous Activity in charge and establish new team for Metal simul activities. Deliver metal output to Nissan Motor Corporation (PR ,PQ , Bulklist ,Water tightness ,QVCC) and follow feedback before submit next output to enhance support.
• Senior Engineer

  Renault-Nissan-Mitsubishi

  2014.01-2016.03

  (2 years)

  (2 years 3 months) Responsible for New project (Nissan Terrano, Renault Lodgy) Metal line and Customer Quality in charge , Following customer Quality concern with internal team to avoid AVES concern and implementing countermeasure. Participating in Top management meeting to update Countermeasure.
• Senior Part Quality Engineer

  Renault-Nissan-Mitsubishi

  2013.05-2014.01

  (9 months)

  Responsible for Part Quality Development during trial phase with following ANPQP ( Alliance New Product Quality Planning) and adopt required modification for industrialization, Deliver parts for trial phase as per Quality requirement, Support to product development team for sourcing supplier based on score card evaluation, Preparing Quality securing plan inline with project milestone.
• Vendor Residential Engineer

  Hyundai Motor India Ltd.

  2011.12-2013.05

  (2 years)

  6 years 2 months (1 year 6 months) Responsible for Vendor parts Quality , Implementing Error proof to prevent parts miss and enhance parts quality , Conducting frequent Process evaluation with Supplier team for continual improvement and improve PPM.
• Upper Body Parts Quality Incharge

  Hyundai Motor India Ltd.

  2010.02-2011.12

  (2 years)

  (1 year 11 months) Responsible for Upper Body incoming parts Quality In charge , Responsible for all parts and in line concerns and implementing effective C/M with proper Root cause Analysis.
• New car Quality team co-ordinater

  Hyundai Motor India Ltd.

  2009.06-2010.02

  (9 months)

  Responsible to support NCQD team to achieve all Quality KPI , In line with project milestone for deliverables, Responsible for preparing handover items with smooth transition
• Closure part Quality incharge

  Hyundai Motor India Ltd.

  2007.04-2009.06

  (2 years)

  (2 years 3 months) Responsible for incoming cover parts Quality (Surface , Dimension) Implementing effective PDCA for Quality concern at Vendor by Process and Product audit.Implementing C/M with proper RCA , Tracking concern from Body shop to different shops up to PDI and resolve with proper analysis.
• Production and Testing Engineer Trainee

  Winergy

  2006.08-2007.04

  (9 months)

  Responsible for assembling wind mill Gearbox based on Engineering drawing, Deliver Gear box as per daily plan also Loading Gear box for testing to analyze noise and vibration.
• Engineering Apprentice

  Brakes India Private Limited

  2006.04-2006.08

  (5 months)

  Auto zinc plating line incharge

Educational experience

• SRM University

  BTech, Mechanical Engineering

  2011.01-2014.01

  (3 years)
• Vel Tech Technical University

  Mechanical Engineering

  2004.01-2006.01

  (2 years)

Certificates